| Urethane Insulated
Horizontal Units
The Ei storage unit design incorporates
low profile saddles and strategic nozzle locations that reduce the
overall height of the unit. These units are designed to be
shipped via a 20' or 40' open top container (unit will be slightly
over height) saving thousands in shipping costs. The
Ei long life units come in a
variety of capacities and are designed to operate efficiently even in
environments of high heat and humidity.
|
 |
Standard 40' Open Top Shipping
Container Used to Reduce Shipping Costs
Open top shipping containers provide easier loading and
unloading along with added protection during shipment.
Drastically reduces shipping costs (compared to break bulk).
|
General
Specifications
- Pressure vessel: Constructed in accordance with Section
VIII, Division 1 of the ASME Code for Unfired Pressure
Vessels for a maximum allowable working pressure (MAWP) if 350 psig
(24.1 bar). 2" NPS & under tank nozzles are
schedule 80 stainless steel.
- Seismic: Per UBC 1997 seismic zone 4, importance
factor of 1.25, soil profile types Sa, Sb, Sc, Sd or
Se, 2km or less to a a type A seismic source. Design
to other Codes available on request.
- Piping: Schedule 80 seamless pipe, 2,000 lbs (907.20 kg)
forged steel fittings, ¼ turn stainless steel isolation.
- Safeties: Dual ASME approved direct spring operated, sized for unconfined outdoor installation.
Larger capacity relief valves will be required for
installation when located indoors or in a fire area.
- Insulation: 4" (10.16 cm) Polyurethane
- Outer jacket: .063" (0.16 cm) Aluminum
- Vaporizers Optional: Steam, water or electric,
capacities to 6,000 lbs/hr (2721.60 kg/hr)
- Liquid
level gauge: Differential pressure indicator type with 6" (15.24 cm)
dial
- Pressure
gauge: 0 - 600 psig with 6" (15.24 cm) dial
- Electrical Characteristics: Models 3.7581Ei and 681Ei use
208/220 V, 60 Hz, 1 Phase. All other models use 208/220/230/460 V, 60 Hz, 3
Phase. Other voltages available upon request.
- Control cabinet: .04" (0.1 cm) prefinished aluminum. Complete
cabinet folds down for total accessibility to refrigeration unit. Add 4' (1.22
m) to length shown below for fold down clearance
- Manway installed for internal inspection and ease in
cleaning
- Stainless steel nozzles and valves
Note: Safety relief valve removed for shipment
due to height requirements on 14-ton (12701 kg) and larger units
Note: All
CO2 storage units are manufactured using normalized
SA-612 carbon steel plate. |
| Horizontal Series Ei Weights and
Dimensions |
| Model |
Nominal Capacity |
Height* |
Length* |
Width* |
Empty Weight* |
| 3.7581Ei
|
3.75
tons |
7'2" |
11'10" |
5'10" |
7,500 lbs |
| 3.4
MT |
2.18 m |
3.61 m |
1.78 m |
3402 kg |
| 681Ei |
6 tons |
7'2" |
15'10" |
5'10" |
9,000
lbs |
| 5.4
MT |
2.18
m |
4.83
m |
1.78
m |
4082
kg |
| 1481Ei |
14
tons |
8'1" |
19'6" |
7'4" |
14,000 lbs |
| 12.7
MT |
2.46 m |
5.94 m |
2.24 m |
6350 kg |
| 2681Ei |
26 tons |
8'1" |
33'0" |
7'4" |
23,500
lbs |
| 23.6 MT |
2.46
m |
10.06
m |
2.24
m |
10659
kg |
| 3081Ei |
30
tons |
8'1" |
37'0" |
7'4" |
26,500 lbs |
| 27.2
MT |
2.46 m |
11.28 m |
2.24 m |
12020 kg |
|
| *Shipping Dimensions
** Weights include insulation, refrigeration unit, saddles
& nozzles for a standard vessel. Actual weights may
vary. |
|
Print a Product
Brochure |
