| |
General
Specifications
- Pressure vessel: Constructed
in accordance wiht Section VIII, Division 1 of the ASME Code
for Unfired Pressure Vessels for a maximum working pressure
(MAWP) of 350 psig (24.1 bar). 2" NPS & under tank
nozzles are schedule 80 stainless steel.
- Seismic: Per UBC 1997 seismic
zone 4, importance factor of 1.0, soil profile types Sa, Sb,
Sc, Sd or Se, greater than 10 km or less to a type A seismic
source. Design to other Codes available on
request.
- Piping: Schedule 80 seamless
pipe, 2,000 lbs (907.20 kg) forged steel fittings, 1/4 turn
stainless steel isolation valves.
- Safeties: Dual ASME approved direct
spring operated, sized for unconfined outdoor
installation. Larger capacity relief valves will be
required for installation when located indoors or in a fire
area.
- Insulation: 6" (15.24 cm)
Polyurethane as standard
- Outer jacket: .063" (0.16 cm)
Aluminum
- Vaporizers
Optional: Steam,
water or electric, capacities to 6,000 lbs/hr (2721.60 kg/hr)
- Liquid level gauge:
Differential pressure indicator type with 6" (15.24 cm) dial
- Pressure gauge: 0 - 600 psig
with 6" (15.24 cm) dial
- Electrical Characteristics:
208/220/230/460 V, 60 Hz, 3 Phase
- Manway installed for internal
inspection and ease in cleaning
- Stainless steel nozzles and
valves
Note: Safety relief valve removed for shipment due to
height requirements
Note: All CO2 storage units are
manufactured using normalized SA-612 carbon steel plate. |
